Author: flash rom

Delivering a solid introduction to assembly language and embedded systems, ARM Assembly Language: Fundamentals and Techniques, Second Edition continues to support the popular ARM7TDMI, but also addresses the latest architectures from ARM, including Cortex™-A, Cortex-R, and Cortex-M processors―all of which have slightly different instruction sets, programmer’s models, and exception handling.

Featuring three brand-new chapters, a new appendix, and expanded coverage of the ARM7™, this edition:

• Discusses IEEE 754 floating-point arithmetic and explains how to program with the IEEE standard notation
• Contains step-by-step directions for the use of Keil™ MDK-ARM and Texas Instruments (TI) Code Composer Studio™
• Provides a resource to be used alongside a variety of hardware evaluation modules, such as TI’s Tiva Launchpad, STMicroelectronics’ iNemo and Discovery, and NXP Semiconductors’ Xplorer boards

Written by experienced ARM processor designers, ARM Assembly Language: Fundamentals and Techniques, Second Edition covers the topics essential to writing meaningful assembly programs, making it an ideal textbook and professional reference.

STMICROELECTRONICS NUCLEO-F042K6 DEV BOARD, STM32F042K6 NUCLEO-32 MCU

Description

The ST-LINK/V2 is an in-circuit debugger and programmer for the STM8 and STM32 microcontroller families. The single wire interface module (SWIM) and JTAG/serial wire debugging (SWD) interfaces are used to communicate with any STM8 or STM32 microcontroller located on an application board.

STM8 applications use the USB full speed interface to communicate with STMicroelectronic’s ST Visual Develop (STVD) or ST Visual Program (STVP) software.

STM32 applications use the USB full speed interface to communicate with Atollic, IAR, Keil or TASKING integrated development environments.

Features

5 V power supplied by a USB connector
USB 2.0 full speed compatible interface
USB standard A to mini B cable
SWIM specific features
1.65 V to 5.5 V application voltage supported on SWIM interface
SWIM low-speed and high-speed modes supported
SWIM programming speed rate: 9.7 Kbytes/s in low speed and 12.8 Kbytes/s in high speed
SWIM cable for connection to the application via an ERNI standard vertical (ref: 284697 or 214017) or horizontal (ref: 214012) connector
SWIM cable for connection to the application via a pin header or a 2.54 mm pitch connector
JTAG specific features
1.65 V to 3.6 V application voltage supported on the JTAG interface and 5 V tolerant inputs
JTAG cable for connection to a standard JTAG 20-pin pitch 2.54 mm connector
Direct firmware update feature supported (DFU)
Status LED which blinks during communication with the PC
Operating temperature 0 to 50 degree

Distribution List:

1 * ST-LINK/V2
1 * USB type A to Mini-B cable
1 * 20-pin JTAG/SWD flat ribbon
1 * SWIM 100mil dual 4-pin connector cable
1 * SWIM 100mil 4-pin to standard ERNI connector cable

Description

The ST-LINK/V2 is an in-circuit debugger and programmer for the STM8 and STM32 microcontroller families. The single wire interface module (SWIM) and JTAG/serial wire debugging (SWD) interfaces are used to communicate with any STM8 or STM32 microcontroller located on an application board.
STM8 applications use the USB full speed interface to communicate with STMicroelectronic’s ST Visual Develop (STVD) or ST Visual Program (STVP) software.
STM32 applications use the USB full speed interface to communicate with Atollic, IAR, Keil or TASKING integrated development environments.
Key Features

5 V power supplied by a USB connector

USB 2.0 full speed compatible interface

USB standard A to mini B cable

SWIM specific features

1.65 V to 5.5 V application voltage supported on SWIM interface

SWIM low-speed and high-speed modes supported

SWIM programming speed rate: 9.7 Kbytes/s in low speed and 12.8 Kbytes/s in high speed

SWIM cable for connection to the application via an ERNI standard vertical (ref: 284697 or 214017) or horizontal (ref: 214012) connector

SWIM cable for connection to the application via a pin header or a 2.54 mm pitch connector

JTAG specific features

1.65 V to 3.6 V application voltage supported on the JTAG interface and 5 V tolerant inputs

JTAG cable for connection to a standard JTAG 20-pin pitch 2.54 mm connector

Direct firmware update feature supported (DFU)

Status LED which blinks during communication with the PC

Operating temperature 0 to 50 Degree

PACKAGE CONTENT

ST-LINK/V2 x1

USB type A to Mini-B cable x 1

20-pin JTAG/SWD flat ribbon x 1

SWIM 100mil dual 4-pin connector cable x 1

SWIM 100mil 4-pin to standard ERNI connector cable x 1

1.100% Brand new and high quality.
2.Support the full range of STM32 SWD interface debugging, simple interface (including power supply), 4 line speed, stable work; Interface definition shell directly address! Don’t need to read instructions!
3.Support all series STM8 SWIM download debugging (common development environment such as IAR, STVD etc.) are supported. Support the software version is as follows:
ST – LINK Utility 2.0 and above
STVD 2 and above
STVP 3.2.3 and above
IAR EWARM V6.20 and above
IAR EWSTM8 V1.30 and above
KEIL RVMDK V4.21 and above
4.Support the firmware upgrade automatically, to ensure that the ST company product support. When they leave the firmware has been upgraded to the latest V2.J17.S4
5.Increase the 5 v power output, the output it can protect the I/O port, not afraid of error cause damage of ST – LINK V2!
6.Easy interface to use pure copper plating 2.54 spacing horn, with 20 cm DuPont line, can deal with different target board line sequence, flexible connection;
7.Use U disk aluminum alloy shell to protect the mainboard, convenient to carry, not afraid of static electricity, not afraid of tumbling.
8.Material: Metal, plastic, electronic parts
9.Color: Red, Blue, Green, Yellow, Black, Purple, Brown, Silver (We will send color at random, thank you for your understanding)
10.Size: Approx. 5.5 x 2 x 0.8cm (L*W*H)
11.What’s in the package:1 x ST-Link V2 STM8 STM32 Programmer + 1 x 20cm Debug DuPont Line

Specifications

5 V power supplied by a USB connector
USB 2.0 full speed compatible interface
USB standard A to mini B cable
SWIM specific features
1.65 V to 5.5 V application voltage supported on SWIM interface
SWIM low-speed and high-speed modes supported
SWIM programming speed rate: 9.7 Kbytes/s in low speed and 12.8 Kbytes/s in high speed
SWIM cable for connection to the application via an ERNI standard vertical (ref: 284697 or 214017) or horizontal (ref: 214012) connector
SWIM cable for connection to the application via a pin header or a 2.54 mm pitch connector

DISTRIBUTION LIST

1 * ST-LINK/V2
1 * USB type A to Mini-B cable
1 * 20-pin JTAG/SWD flat ribbon
1 * SWIM 100mil dual 4-pin connector cable
1 * SWIM 100mil 4-pin to standard ERNI connector cable

Note: Due to different production batches, product’s color may be different.

1.100% Brand new and high quality.
2.Support the full range of STM32 SWD interface debugging, simple interface (including power supply), 4 line speed, stable work; Interface definition shell directly address! Don’t need to read instructions!
3.Support all series STM8 SWIM download debugging (common development environment such as IAR, STVD etc.) are supported. Support the software version is as follows:
ST – LINK Utility 2.0 and above
STVD 2 and above
STVP 3.2.3 and above
IAR EWARM V6.20 and above
IAR EWSTM8 V1.30 and above
KEIL RVMDK V4.21 and above
4.Support the firmware upgrade automatically, to ensure that the ST company product support. When they leave the firmware has been upgraded to the latest V2.J17.S4
5.Increase the 5 v power output, the output it can protect the I/O port, not afraid of error cause damage of ST – LINK V2!
6.Easy interface to use pure copper plating 2.54 spacing horn, with 20 cm DuPont line, can deal with different target board line sequence, flexible connection;
7.Use U disk aluminum alloy shell to protect the mainboard, convenient to carry, not afraid of static electricity, not afraid of tumbling.
8.Material: Metal, plastic, electronic parts
9.Color: Red, Blue, Green, Yellow, Black, Purple, Brown, Silver (We will send color at random, thank you for your understanding)
10.Size: Approx. 5.5 x 2 x 0.8cm (L*W*H)

What’s in the package:
1 x ST-Link V2 STM8 STM32 Programmer
1 x 20cm Debug DuPont Line

Manufacturer: Keil Tools Product Category: JTAG Debuggers RoHS: RoHS Compliant Details Product: JTAG Debuggers For Use With: ULINKpro Core: ARM Cortex A, ARM Cortex M, ARM Cortex R Interface Type: Serial, USB Operating Supply Voltage: 3.3 V Brand: Keil Tools Description/Function: Debug on a wide range of supported devices

The DJI Phantom 4 is the smartest flying camera drone from DJI, allowing you to capture superb aerial images on your iPhone or iPad. Not only does it fly intelligently with a tap and automatically create seamless tracking shots, it can autonomously avoid obstacles and do much more. Sense and avoid Twin front-facing optical sensors see obstacles, so if there’s something in the Phantom drone’s way it wil stop or fly around it – giving you the confidence to fly safely. Fly with touch In TapFly mode, tap the screen of your iPhone or iPad to move in a particular direction. And keep flying by tapping elsewhere on the screen. Visual tracking Now it’s a snap to fly while keeping the camera pointed steadily at a moving subject. ActiveTrack uses advanced visual tracking capabilities to fully automate tracking, so you get the perfect shot every time. Easy to fly Up to 24 satellites plus advanced Vision Positioning systems make for effortless flight. The Phantom 4 knows where it is, where you are, and flies exactly as you tell it to. Professional-quality imaging Shoot 4K video at 30fps, full HD 1080p video at up to 120fps for crisp slow motion, and 12 megapixel photos in DNG RAW for full editing creativity. High-speed fun A new sport mode capable of up to 45mph speeds makes flying even fun. Long flight times A large-capacity battery and a high-efficiency design give you more than 28 minutes of flight time when flying without satellite support. Comprehensive app control The free DJI GO app on your iPhone or iPad provides a live video feed, full manual camera controls, and access to all smart flight features including Follow Me, TapFly, and ActiveTrack.

For Standard/Enhanced/True-USB Willem EPROM programmer/All TOP series/EasyPro series/Wellon,Weilei series/SuperPRO series and all other brand universal programmer.

Device supports 5V 27,28,29,39,49 EPROM, EEPROM,Flash in PLCC32 package devices.

For Standard/Enhanced/True-USB Willem EPROM programmer/All TOP series/EasyPro series/Wellon, Weilei series/SuperPRO series and all other brand universal programmer.

It supports 5V and 3.3V devices, such as 27,28,29,39,49 EPROM, EEPROM,Flash devices. eg.27C64-27C512,29C256 etc.

Example of part number supported:

27C128 27C256 27C512A 27C64 27LV256 27LV512A 27LV64 28F256A AM27256;

AM27C64 AM27C128 AM27C256 AM27C512;

AT27BV256 AT27BV512 AT27C256R AT27C512R AT27LV256A AT27LV512A AT28C256 AT29C256 AT29LV256;

CAT28C256 CY7C274;

D27128 D27128A D27256 D27512 D27513 D2764 D2764A D27C128A D27C256 D27C512 D27C513 D27C64A D87C64;

EN27C512;

FM27C256 FM27C512;

HN27128G HN27128P HN27256G HN27512G HN2764G HN2764P HN27C256AG HN27C256G HN27C256HG HN27C512G HN27C64G HT27C512 HT27LC512 HT27PC256 HT27PC512 IS27C256 IS27C512 IS27HC256 IS27HC512;

M27128A M27256 M27512 M2764A M27C256B M27C512 M27C64A M27V256 M27V512 M27W256 M27W512M28C256 M28C64 M28C64C M28C64X M28F256 M28F256A;

M5L27128K M5L27128P M5L27256K M5L27256P M5L27512K M5L27512P M5L2764K M5L2764P M5M27C128K M5M27C128P M5M27C256K M5M27C256P M5M27C512K M5M27C512P;

MBM27128 MBM27256 MBM2764 MBM27C128 MBM27C256 MBM27C256A MBM27C512 MBM27C64 MX26C512A;

MX27C256 MX27C512 MX27L256 MX27L512 NMC27C128B NMC27C256 NMC27C256BN NMC27C512 NMC27C512AN NMC27C64 NMC27C64B SST27SF256 SST27SF512 TC54256AP TC54512AP TC57256AD TC57512AD TMS27C128 TMS27C256 TMS27C512 TMS27PC128 TMS27PC256 TMS27PC512 UPD27128 UPD27256 UPD2764 UPD27C256 UPD27C256A UPD27C512;

UPD27C64;

W27C512 W27E512;

X28C256 X28C64 X28HC256 XLS28C64B;

X28VC256 XL28C256 XL28C64.

This is a generic PLCC28-DIP24 adapter. It works for all TOP series/EasyPro series/Wellon,Weilei series/SuperPRO series and all other brand universal programmer.

SSOP28 to DIP28 Socket CNV-SSOP-34/OTS-28(34)-0.65 IC programmer socket adapter G540 EZP2010 TOP3000

Programs devices with Vcc as low as 1.2V.
Built with 144 universal pin-drivers for support of today’s most complex devices. Universal and device independent socket adapters are available for various packages up to 144 pins.
The programmer operates in either PC hosted mode or stand-alone mode.

Under PC hosted mode, a PC controls the programmer via a high-speed USB2.0 connection to program a chip.
Under stand-alone mode, the user controls the programmer via
20-characters, 4-line LCD display with 6-KEY
A CF (compact flash) card stores the project files.

ISP/ICP programming capability through optional ISP/ICP adapter.
Programming / testing features for TTL/CMOS logic ICs and memories.
In stand-alone mode, the user can operate multiple units to construct a concurrent multiprogramming system.
Over-current and over-voltage protection for safety of the chip and programmer hardware.
Compatible with Windows XP / Vista / 7 / 8 (32/64 bit)
Only IC manufacturer approved programming algorithms provide high reliability.
Vcc verification at (+5%~-5%) and (10%~-10%) enhances programming reliability.
Includes the following advanced and powerful software functions:

Chip operation starts immediately upon proper chip insertion in Production Mode.
Project function simplifies processes such as device selection, file loading, device configuration setting, program option, and batch file setting into one step.
Password protection provides security for project files and production volume control.
Batch command combines device operations like program, verify, security into a single command at any sequence.
Serial number generators are available as standard or customer-specific functions.
Log file provides production quality tracking.

Support devices with Vcc from 1.2V – 5V.
30% faster programming speed compared to SuperPro5000 with ARM9 MCU Processor + Linux ultra-fast algorithm processing engine.
Support files up to 256 GBytes.
Built with 144 universal pin-drivers. Universal adapters are available for various package types up to 144 pins. More efficient for new device support.
Stand-alone mode (No PC required) and PC hosted mode.
Under PC hosted mode the programmer is controlled by a PC via USB2.0 (high speed) to program a chip.
Under stand-alone mode, the programmer is controlled via the 6-KEY keypad and the 20 character by 4 line LCD display.
A CF (compact flash) card is used to store the project files.
Cluster 1-15 units for flexible volume production. Operate multiple units to construct a concurrent multi-programming system.
ISP / ICP programming capability available via ISP / ICP adapter.
Over-current and over-voltage protection for safety of the chip and programmer hardware.
Compatible with Windows XP / Vista / 7 / 8 (32/64 bit)
Only IC manufacturer approved programming algorithms used for high reliability.
Vcc verification at (+5%~-5%) and (10%~-10%) enhances programming reliability.
Advanced and powerful software functions:
Production mode start chip operation the moment the chip is inserted properly.
Project function simplifies processes such as Device Selection, File Loading, Device Configuration Setting, Program Option, and Batch File Setting into one step.
Password for project files can be set for volume production control
Batch command combines device operations like Program, Verify,and Security into a single command at any sequence.
Serial numbers generators are available as standard or customer-specific functions.
Log file is useful for quality tracking.

Features:
Brand new and high quality.
Universal SOIC,SOP8(EZ) SO8 TO Dip 8 Adapter 150mil IC.
High quality and durable.
Tested before shipping.
Easy to use.
programmer(1.27 Pitch) and all SOP8 narrow chips.
Suitable for ALL-11 Series,ALL-100GANG , LT-48 Series, SuperPRO Series, TOP Series etc.
Support Chips: 24CXX, 93CXX and all SOP8 narrow chips.
Package Included:
1 x SO8 SOP8 to DIP8 EZ Programmer adapter Socket