Author: flash rom

Conveniently sized Extech MN35 manual-ranging multimeter enables you to measure AC and DC voltage up to 600 Volts. It is designed with a large, easily readable LCD screen. Unit also provides resistance tests with continuity and diode functions, thermocouple temperature measurements up to 1400deg F and a data hold function that locks the reading on the display. Compact multimeter is ergonomically designed with curved corners. Features an integrated tilt stand and impact-resistant rubber holster for excellent grip and protection. Includes 9V battery, test leads, Type K thermocouple probe and instructions. DC Volts: 600, Accuracy: 0.5% DCV, 1.2% ACV, 1.5% DC current @ 200mA, Amps: 10, Functions (qty.): 8, Application: DC current, DCV, ACV, resistance, temperature, continuity/diode, Dimensions L x W x H (in.): 5 7/16 x 2 13/16 x 1 1/2, AC Volts: 600, Low Battery Indicator: Yes, Display Shows: 2,000 count

PEAKMETER PM8233D Digital Multimeter meter designed for the electronics enthusiast or handyman. Auto-ranging design makes it easy to use single handed when testing – no need to switch ranges all the time!

Specifications:
DC Voltage:
200mV/2V/20V/200V, ±(0.5%+2)
600V, ±(0.8%+2)

AC Voltage:
2V/20V/200V/600V ±(1.0%+3)

DC Current:
200µA/2mA/20mA/200mA/10mA, ±(1.0%+3)
10A, ±(3%+3)

AC Current:
200µA/2mA/20mA/200mA(1.2%+3)
10A, ±(3%+3)

Resistance:
200Ω/2kΩ/20kΩ/200kΩ/2MΩ, ±(0.8%+2)
20MΩ, ±(1.0%+2)

Frequency: 20kHz, ±(1.0%+2)
Features:
Item model number:PM8233D
Display: 2000 Counts
Auto range: √
Data  hold: √
Back light: √
Diode test: √
Continuity: √
Maximum Value hold: √
Power supply: DV9V 6F22 Battery
size: 5.5 x 1.2 x 2.6 inches
Weight: Approx.110g
Safety Rating: IEC 61010-1,-2-030,EN61010-2-033,EN61326-1,CAT.III 600V

Package Include:
1 x PM8233D Digital Multimeter
2 x Test Lead
1 x User Manual

The Fluke true-rms clamp meter is a great clamp meter for general, grab-and-go troubleshooting needs. The Fluke 323 323-AMZN is ideally suited for current measurements up to 400 a in tight cable compartments.

Product Features

AC/DC 1000V/10A 200KHz 200uF 40Mohm Relative Measurement hFE Diode Check Continuity

LED / Sound Warning when incorrect banana jacks are used relative to function switch setting

Auto and Manual Ranging with Relative measurement (all ranges except frequency)

All range fused (resettable) with 1 Year Warranty

Auto power off (could be disabled) & Blue LED Back-lit LCD display

The newly released Tekpower TP8229 DMM is a upgrade version of the Mastech MS8229, it combines a multimeter, a sound level meter, thermometer, luxmeter, humidity meter all in one. Also it is packed with many nice features such as temperature &, humidity display, sound and light warning for the jacks and back-lit LCD Screen.
Specifications:
DCV: 400m/4/40/400/1000V, +/- 0.7%,
ACV: 400m/4/40/400 +/- 0.8% 750V, +/- 1.0%,
DCA: 400µ/4m/40m/400m +/- 1.2% 4/10A, +/- 2.0%
ACA: 400µ/4m/40m/400m +/- 1.5 % 4/10A, +/- 3.0%,
Resistance: 400/4K/40K/400K/4M +/- 1.2% 40M, +/- 2.0%,
Capacitance: 40n/400n/4m/40m/100mF ±3.0%,
Frequency: 10/100/1K/10K/100KHz/200KHz ± 2.0%, >200KHz,reference only,
Temperature: -20 – 1000 degrees C (0?1,800 degrees F) +/- 3.0% (C/F selectable)
RH: 20?95%, +/- 5.0%,
Lux: 4,000/40,000 Lux, +/- 5.0%,
Sound dB: 40 ? 100dB, +/- 3.5% @ 94dB,
Diode test,
Continuity tester: Buzzer if resistance is less than 40 ohms.
Duty cycle: 0.1%-99.9% ± 3.0%.
Dimensions and Weight: 195 x 92 x 55mm, 400g.
Battery: 1.5 x 3 AAA.
Accessories: Test leads, K-Type thermo probe & User Manual

Klein Tools MM400 is an auto-ranging multimeter that measures AC/DC voltage, AC/DC current, and resistance. It can also measure temperature, capacitance, frequency, duty-cycle, and test diodes and continuity. Klein Tools’ Test and Measurement product line was exclusively designed from the ground up by electricians for electricians. Years of field research, combined with extensive input from electricians across America, inspired the development of meters and electrical testers loaded with innovative, time-saving features.

The Dr.meter PM18 Multimeter is a powerful digital device that can accurate measure AC/DC voltage and current, resistance, diode, transistor, continuity, frequency, capacitance and live line test. It is packed with advantageous features such as NCV detection, back LED light and backlit large LCD screen, greatly enhancing its functionality and performance. A compact and handy device to pinpoint everyday electrical issues around the house with safe and user-friendly operation.

Specifications
– DC voltage: 600mV/6V/60V/600V/1000V ±(0.5%+3)
– AC voltage: 6V/60V ±(0.8%+3), 600V/750V ± (1.0%+10)
– DC current: 60uA/60mA/600mA ±(0.8%+3), 20A ± (1.2%+3)
– AC current: 60mA/600mA ±(1.0%+3), 20A ± (1.5%+3)
– Resistance: 600Ω/6kΩ/60kΩ/600kΩ/6MΩ ±(0.8%+3), 60MΩ ±(1.2%+30)
– Frequency: 9.999Hz/99.99Hz/999.9Hz/9.999KHz/99.99KHz/999.9KHz/9.999MHz ± (1%+3)
– Capacitor: 6nF ±(4.0%+30), 60nF/600Nf/6uF/60uF/600uF/6mF ±(4%+3), 100mF ±(5%+3)
– Display: LCD, 6000 counts 
– Fuse protection: FF630mA/250V for mA position, FF20A/250V for A position
– Sampling rate: about 3 times/second.
– Over range indication: “OL” displayed on the LCD
– Polarity indication: “-” auto displayed.
– Low battery indication: low battery mark displayed on the LCD
– Battery: 4 x 1.5V AA battery(included)
– Dimension: 190 x 89 x 50 mm

Notes: 
– Do not connect it to the voltage over 1000VDC or 750VAC 
– Make sure not connect the error measuring range 
– Please remove the test lead and cut off the power before replacing battery and fuse.

Package Contents
1 x Dr.meter PM18 Multimeter
1 x Test Lead
4 x 1.5V AA Battery
1 x User Manual
1 x Warranty Card 

Very reliable and most cost-effective auto -range DMM on the market, sold several thousands every month, it test AC DC Voltage, Amp, Diode, he, Continuity, Resistance, Capacitance, Frequency, Temp data hold, auto power offer, function protect, Max display: 4000 DCV: 400mV/4V/40V/400V/1000V, accuracy: 0.5-Percent+4 ACV: 4V/40V/400V/1000V accuracy: 0.8-Percent+6 DCA: 400uA/4000uA/40mA/400mA/20A accuracy: 1.0-Percent+5 ACA: 400uA/4000uA/40mA/400mA/20A accuracy: 1.5-Percent+5 Resistance:400?/4k?/40k?/400k?/4M?/40M? accuracy: 0.8-Percent+1 Capacitance: 4nF/40nF/ 400nF/4uF/40uF/200uF accuracy: 3.5-Percent+8 Frequency: 100Hz/1kHz/10kHz/100kHz/1MHz/30MHz accuracy: 0.5-Percent+4 Centigrade temperature: -40C1000C accuracy: 0.8-Percent+4 Standard accessories: 1) Banana Test leads and temperature probe. 2) English manual; 3) Portable bag; 4) Banana plug to Alligator clip test leads; Click here to download the English Manual: www.aidetek.com/New_products_info/Datasheet/Vichy/VC97+.pdf Brand New with 1 year USA warranty, support e-mail: supportataidetek.com.

The am-510 commercial/residential Multimeter is designed for light commercial and advanced residential applications. It is an Auto- or manual-ranging meter for measuring current, Voltage, resistance, capacitance, frequency, microamps, and duty cycles in commercial, home repair, automotive and electrical testing applications. It comes with non-contact Voltage detection, built-in flash light, bright backlit display and Auto power-off feature. The am-510 measures alternating current (AC) and direct current (DC) to 10 amps, AC Voltage and DC Voltage to 600 volts (V), resistance to 40 megaohms, capacitance to 100 microfarads, frequency to 10 megahertz (MHz), micro current to 4,000 microamps, and duty cycles to 99 percent . The battery Test feature checks the amount of charge remaining in standard 1.5V and 9V batteries. The microamp reading identifies current changes in flame detector applications. The backlit liquid crystal display (LCD) is visible in low light. The relative zero mode stores a reading in Memory to use as a zero point for subsequent readings, allowing for quick Comparison of readings. The hold function keeps a reading on the display, even after the meter is disconnected. Audible continuity confirms that the circuit is capable of conducting electricity and the diode Test detects whether the circuit’s diodes work properly. An Auto power-off mode turns off the unit after 30 minutes of non-use to conserve the battery, and a low-battery indicator signals when the meter’s batteries need to be replaced. The back of the meter has a tilt stand that allows the meter to be propped on a surface for hands-free use. A probe holder on the Body of the meter stores probes when not in use. It meets international electro technical commission (IEC) Safety standard 61010 and is certified for category III installations up to 600V. The am-510 comes with a set of detachable Test leads.