Author: flash rom

Brand New

Upgrade your FCB1010 in few easy steps: 1. take the FCB unit apart, 2. remove the old EPROM chip, 3. install the new one, 4. put the unit back together. Done!

Lumenier’s latest 30 amp ESCs pre-loaded with Simon Auto Shot firmware, boot loader, and modified hardware. The Lumenier Mini 30 amp ESC with customized Simon firmware including One Shot auto-detect is the perfect ESC to use on mini FPV quads such as the QAV250. This ESC is small in size (51x25x10mm) and big on power, supporting 30A on 4s. The ESC comes pre-loaded with the newest firmware, which is compatible with new features like “One Shot” (it will auto-detect if One Shot is enabled), Comp PWM (similar to KISS braking feature), compatible with all Lumenier motors up to 4 cell. Max continuous load: ~30 amps. Burst Current: 40A/10sec. BEC:5v/1amp max. Lipo Cells: 2-4 cells. Weight: 26g (board) 32g (total with wires and connectors). High quality N-FET only flashed with Simon firmware and 5v 1A BEC.

Boasting high efficiency, all N-channel MOSFET design, jitter-free hardware PWM input, and smooth power response the Afro ESC series are set to change the expectations of multi-rotor pilots around the globe. The Afro ESC series ship with multi-rotor specific SimonK software preloaded! No need to reflash. For added convenience the Turnigy USB linker can be used via the PWM signal lead for any future software updates eliminating the need for complicated flashing jigs or the need to cut open the heat shrink.
MikroKopter I2C compatibility has also been built in as standard. A DIY port is available under the shrink wrap which allows using the ESC with MikroKopter hardware that uses I2C control.
Now Shipping with OneShot125.
Some stocks may require to flash ESC to OneShot125 via flash tool referenced in the related items
Specs:
Current Draw: 30A Continuous
Voltage Range: 2-6s Lipoly
BEC: N/A – OPTO
Input Freq: 1KHz
Firmware: afro_nfet.hex
Discharge wire/plugs: 15AWG/Male 3.5mm
Motor wire/plugs: 16AWG/Female 3.5mm
Weight: 26.5g (Included wire, plug, heat shrink)
Size: 50 x 25 x 11mm
Royalties paid on each unit sold to SimonK and Hamasaki for their design work, without which the Afro ESC would never have been born, thanks guys!

HF-Tech’s chips have changed the world. Embedded into the heads of over 90% of the world’s population, they have cured autism, dementia, provided intelligence boosts, and helped to ease some of the more mundane tasks in life.

Daniel Blair works in the Workshop, creating ROMs and hacking the chips to further increase their usefulness, an activity that is deemed illegal. But Rouge, his favoured ROM, is better than the official firmware; it simply does more. And besides, who knows what really goes into HF-Tech’s official software releases? What is it capable of sending? And what can it receive? Dan doesn’t quite trust them, not least of all because of the flaws in the system.

And when the day comes that HF-Tech releases a software update that allows a terrorist attack to take place, Dan begins to distrust the company even more.

But is there a threat closer to home that he should be paying more attention to..?

Accelerate business results with outstanding print quality. Tackle large jobs and equip workgroups for success wherever business leads. Easily manage and expand this impressively fast, versatile printer—and help reduce environmental impact.

The flash-link updater updates the firmware on all of our new digital modules. It includes windows (98/2000/xp/vista) flashlink manager and a usb cable and requires a pc with an internet connection to upgrade/downgrade the firmware version on any of our supported modules.every new update-able module comes preloaded with the latest firmware so updates are optional not mandatory. Every updatable module is branded with a unique serial number that allows to view the preloaded firmware version the update history including the current firmware version and any update errors in real time. Every serial number is accompanied with a bar-code which is a tell tale sign of update-able functionality and can be used for inventory management.uses the flash-link managerhttp://ifar.Ca/en/products/flashlinkmanager.Html [single]

With v2 firmware update, correcting many flaws of the previous 9X, plus inbuilt 2.4Ghz (no daggy second antenna) this is a quality, reliable 2.4Ghz system suitable for beginners and pro pilots alike.Get that locked-in feeling that only 2.4Ghz glitch free technology can provide.Ultra fast reaction times and interference free control of your model is only achievable with this2.4Ghz technology.Without a doubt, the best value 9Ch system available!Number of Channnel: 8ch ppm/9ch pcmDisplay: 128*64LCDSupport Type: Heli/Acro/GlidSupport user: 8Stick model: 4Encoder type: ppm/pcmSubtrim: YesSimulator Interface: YesBuzzer: YesLow Voltage Show: YesRequired: BatteryIncluded:Turnigy 9x 9Ch TransmitterTurnigy RF9X-V2 module Turnigy 9X8C-V2 8-channel receiverImportant.The TURNIGY 9X has been reflashed with the new v2firmware, fixing previous menu and mixing issues. This firmware flash is only available from our TURNIGY 9X system as we flash each unit in our officebefore it is shipped.Purchases ofany other rebranded version of the TURNIGY 9X will not have the latest firmware and patches (even the OEM factory does not have these updates).NOTE: ‘SWITCH ERROR’ means you have one of the switches in the wrong position when you turn the radio on. It is not a fault.

Expand and accelerate your data transfer and charging.

The more the merrier.
With transfer rates of up to 5Gbps, set aside less time for syncing and more time for work. With 10 data terminals to choose from, forget about ever having to switch or unplug again.

Fast charging.
10th-port dual functionality enables fast charges of up to 1.5 amps with BC 1.2 charging-compliant devices, while simultaneously transferring data. Charge via a power adapter for higher 2 amp speeds with all USB-enabled devices when hub is disconnected from an active USB port, or your computer is off or in sleep mode. Dual functions, duly facilitated.

A mainstay for the future.
Featuring a high-grade chipset and a powerful 60W adapter, this hub ensures a stable power supply while you work. Get steady operation for years to come. Whether at home or in the office, add another can’t-do-without fixture to your desk.

BC 1.2 Charging-Compliant Devices:
Apple: iPhone 5 / 5s, iPad Air, iPad mini / mini 2
Samsung: Galaxy S3 / S4, Galaxy Note 1 / 2, Galaxy Mega, Galaxy Mini, Exhilarate, Galaxy Tab 2 10.1
Google: Nexus 4 / 5 / 7 / 10
Sony: Xperia TX
Nokia: Lumia 920, Lumia 1020

System Requirements
Windows (32/64 bit) 10 / 8.1 / 8 / 7 / Vista / XP, Mac OS X 10.6-10.9, Linux 2.6.14 or later.
Mac OS X Lion 10.7.4 users should upgrade to Mountain Lion 10.8.2 or later to avoid unstable connections.

Compatibility
2.4GHz wireless devices, MIDI devices and some USB 3.0 devices may not be supported. Try using the host port or a USB 2.0 connection.

Power Usage
For a stable connection, don’t use this hub with high power-consumption devices, such as external hard drives. The hub will sync but not charge tablets and other devices which require a higher power input.

The Firmware Handbook provides a comprehensive reference for firmware developers looking to increase their skills and productivity. It addresses each critical step of the development process in detail, including how to optimize hardware design for better firmware. Topics covered include real-time issues, interrupts and ISRs, memory management (including Flash memory), handling both digital and analog peripherals, communications interfacing, math subroutines, error handling, design tools, and troubleshooting and debugging.

This book is not for the beginner, but rather is an in-depth, comprehensive one-volume reference that addresses all the major issues in firmware design and development, including the pertinent hardware issues.

Included CD-Rom contains all the source code used in the design examples, so engineers can easily use it in their own designs

Embedded Firmware Solutions is the perfect introduction and daily-use field guide–for the thousands of firmware designers, hardware engineers, architects, managers, and developers–to Intel’s new firmware direction (including Quark coverage), showing how to integrate Intel® Architecture designs into their plans.

Featuring hands-on examples and exercises using Open Source codebases, like Coreboot and EFI Development Kit (tianocore) and Chromebook, this is the first book that combines a timely and thorough overview of firmware solutions for the rapidly evolving embedded ecosystem with in-depth coverage of requirements and optimization.

What you’ll learn

• Understand the key differences between PC and embedded ecosystems in terms of firmware needs.
• Thorough underpinning of Intel’s firmware solutions.
• How to build a firmware stack for Quark.
• How to integrate FSP with a bootloader, by studying the hands-on example of Coreboot and UEFI.
• How to make a smart “build-it or buy-it” decision when starting a new embedded project.

Who this book is for

Firmware designers and engineers, hardware engineers, software architects, and product development managers.

Why care about hardware/firmware interaction? These interfaces are critical, a solid hardware design married with adaptive firmware can access all the capabilities of an application and overcome limitations caused by poor communication. For the first time, a book has come along that will help hardware engineers and firmware engineers work together to mitigate or eliminate problems that occur when hardware and firmware are not optimally compatible. Solving these issues will save time and money, getting products to market sooner to create more revenue.

The principles and best practices presented in this book will prove to be a valuable resource for both hardware and firmware engineers. Topics include register layout, interrupts, timing and performance, aborts, and errors. Real world cases studies will help to solidify the principles and best practices with an aim towards cleaner designs, shorter schedules, and better implementation!

• Reduce product development delays with the best practices in this book
• Concepts apply to ASICs, ASSPs, SoCs, and FPGAs
• Real-world examples and case studies highlight the good and bad of design processes