Author: flash rom

Posted on

Z3X Easy-Jtag Plus Full Set for Phone Boot Repair, Data Recovery, and SPI Memory Programming

Z3X Easy-Jtag Plus is an innovative all in one service tool for phone and phone boot repair, data recovery, SPI memory programming and many other features. Supports eMMC, ISP, JTAG, SPI, NAND and many more protocols.

Hardware features:
Updated Host MCU SAM3X8E
Updated high-speed FPGA SPARTAN6
Updated power management subsystem – full digital PWM with ADC control
Added Micro-USB connector
Added VCC and VCCQ switch with overcurrent protection
Updated USB device interface: USB 2.0 480 Mbps
Integrated ISP engine: Z3X high power pro engine (4 MB/s)
Added eMMC 8-bit high-speed interface up to 42 MHz
Integrated NAND* engine: NFC with 4 KB RAM buffer and ECC
Integrated M-PHY* interface
Integrated SPI engine: up to 21 MHz clock for popular SPI memory flash IC
Integrated self-test core that excludes 90% faults in production

Hardware benefits:
Box to Host PC speed increased up to 40 MB/sec
Compatible with old Easy JTAG 1st generation ISP adapters (1 bit)
Compatible with most of the popular eMMC sockets (with supplied adapters)

eMMC Socket – Features:
Over 10K cycles of lifetime performance
Support for a wide range of eMMC ICs
High-speed up to 40 MB/sec through 8-bit bus
EMI resistant design, low noise components
Integrated power logic
Surge protection – smart fuse driven (0.5A threshold)

Z3X Easy-Jtag Plus Full Set – Package Content:
Easy-JTAG Plus Box Hardware
Z3X preactivated card with EasyJTAG PLUS Activation
Z3X EMMC socket (BGA153/169, BGA162/186, BGA221, BGA529)
USB A-B cable
Adapter set (JTAG, ISP 1BIT, ISP 4BIT, U-SOCKET, E-SOCKET)
1 year guaranteed free support access
* The supplier retains the right to change some positions in the list of cables and accessories coming together with the product.

Posted on

Z3X Easy-Jtag Plus Lite Upgrade Set for Z3X Easy-Jtag Owners

Z3X Easy-Jtag Plus Lite Upgrade Set is designated for those users, who already own Z3X Easy-Jtag, but want to increase its possibilities and enjoy new features.
Z3X Easy-Jtag Plus is an innovative all in one service tool for phone and phone boot repair, data recovery, SPI memory programming and many other features. Supports eMMC, ISP, JTAG, SPI, NAND & other protocols.
Offer is valid for the boxes activated before 07.07.2017.

Hardware features:
Updated Host MCU SAM3X8E
Updated high-speed FPGA SPARTAN6
Updated power management subsystem – full digital PWM with ADC control
Added Micro-USB connector
Added VCC and VCCQ switch with overcurrent protection
Updated USB device interface: USB 2.0 480 Mbps
Integrated ISP engine: Z3X high power pro engine (4 MB/s)
Added eMMC 8-bit high-speed interface up to 42 MHz
Integrated NAND* engine: NFC with 4 KB RAM buffer and ECC
Integrated M-PHY* interface
Integrated SPI engine: up to 21 MHz clock for popular SPI memory flash IC
Integrated self-test core that excludes 90% faults in production

Hardware benefits:
Box to Host PC speed increased up to 40 MB/sec
Compatible with old Easy JTAG 1st generation ISP adapters (1 bit)
Compatible with most of the popular eMMC sockets (with supplied adapters)

Z3X Easy-Jtag Plus Full Set – Package Content:
Easy-JTAG Plus Box Hardware
Free activation for new users (6 months old boxes)*
USB A-B cable
Adapter set (JTAG, ISP 1BIT, ISP 4BIT, U-SOCKET, E-SOCKET)
1 year guaranteed free support access
*A smart card is not included. Need to use the card from an old box.
**The supplier retains the right to change some positions in the list of cables and accessories coming together with the product.

Posted on

Z3X Easy-Jtag+ Full Upgrade Set for Easy-Jtag Owners. Specially for Boxes activated after 2017.07

Z3X Easy-Jtag Plus Full Upgrade Set is designated for those users, who already own Z3X Easy-Jtag, but want to increase its possibilities and enjoy new features.
Z3X Easy-Jtag Plus is an innovative all in one service tool for phone and phone boot repair, data recovery, SPI memory programming and many other features. Supports eMMC, ISP, JTAG, SPI, NAND & other protocols.
Offer is valid for the boxes activated after 07.07.2017.
Hardware features:
Updated Host MCU SAM3X8E
Updated high-speed FPGA SPARTAN6
Updated power management subsystem – full digital PWM with ADC control
Added Micro-USB connector
Added VCC and VCCQ switch with overcurrent protection
Updated USB device interface: USB 2.0 480 Mbps
Added eMMC 8-bit high-speed interface up to 42 MHz
Integrated NAND* engine: NFC with 4 KB RAM buffer and ECC
Integrated SPI engine: up to 21 MHz clock for popular SPI memory flash IC

Hardware benefits:
Box to Host PC speed increased up to 40 MB/sec
Compatible with most of the popular eMMC sockets (with supplied adapters)

eMMC Socket – Features:
Support for a wide range of eMMC ICs
High-speed up to 40 MB/sec through 8-bit bus
EMI resistant design, low noise components
Integrated power logic
Z3X Easy-Jtag Plus Full Upgrade Set – Package Content:
Z3X EMMC socket (BGA153/169, BGA162/186, BGA221, BGA529)
Easy-JTAG Plus Box hardware
Free activation for new users (boxes that have been in use for less than 6 months)
USB A-B cable
Adapter set – 5 pcs. (JTAG, ISP 1BIT, ISP 4BIT, U-SOCKET, E-SOCKET)
1 year free support
*Smart card is not included. Need to use the card from an old box.
* The supplier retains the right to change some positions in the list of cables and accessories coming together with the product.

Posted on

Z3X Easy-Jtag Plus Full Upgrade Set for Z3X Easy-Jtag Owners

Z3X Easy-Jtag Plus Full Upgrade Set is designated for those users, who already own Z3X Easy-Jtag, but want to increase its possibilities and enjoy new features.
Z3X Easy-Jtag Plus is an innovative all in one service tool for phone and phone boot repair, data recovery, SPI memory programming and many other features. Supports eMMC, ISP, JTAG, SPI, NAND & other protocols.
Offer is valid for the boxes activated before 07.07.2017.
Hardware features:
Updated Host MCU SAM3X8E
Updated high-speed FPGA SPARTAN6
Updated power management subsystem – full digital PWM with ADC control
Added Micro-USB connector
Added VCC and VCCQ switch with overcurrent protection
Updated USB device interface: USB 2.0 480 Mbps
Added eMMC 8-bit high-speed interface up to 42 MHz
Integrated NAND* engine: NFC with 4 KB RAM buffer and ECC
Integrated SPI engine: up to 21 MHz clock for popular SPI memory flash IC

Hardware benefits:
Box to Host PC speed increased up to 40 MB/sec
Compatible with old Easy JTAG 1st generation ISP adapters (1 bit)
Compatible with most of the popular eMMC sockets (with supplied adapters)

eMMC Socket – Features:
Support for a wide range of eMMC ICs
High-speed up to 40 MB/sec through 8-bit bus
EMI resistant design, low noise components
Integrated power logic
Z3X Easy-Jtag Plus Full Upgrade Set – Package Content:
Z3X EMMC socket (BGA153/169, BGA162/186, BGA221, BGA529)
Easy-JTAG Plus Box hardware
Free activation for new users (6 months old boxes)
USB A-B cable
Adapter set – 5 pcs. (JTAG, ISP 1BIT, ISP 4BIT, U-SOCKET, E-SOCKET)
1 year guaranteed free support access
*Smart card is not included. Need to use the card from an old box.
* The supplier retains the right to change some positions in the list of cables and accessories coming together with the product.

Posted on

Z3X Easy-Jtag Plus Lite Set for Phone Boot Repair, Data Recovery, and SPI Memory Programming

Z3X Easy-Jtag Plus is an innovative all in one service tool for phone and phone boot repair, data recovery, SPI memory programming and many other features. Supports eMMC, ISP, JTAG, SPI, NAND and many more protocols.

Z3X Easy-Jtag Plus – Hardware features:
Updated Host MCU SAM3X8E (comparing to LPC1768 in old box)
Updated high-speed FPGA SPARTAN6 (comparing to SPARTAN3 in old box)
Updated power management subsystem – full digital PWM with ADC control
Added Micro-USB connector (if additional power required)
Added VCC and VCCQ switch with overcurrent protection
Updated USB device interface: USB 2.0 480 Mbps (high speed)
Integrated ISP engine: Z3X high power pro engine (4 MB/s)
ISP support 1 and 4 bit* connection
Added eMMC 8-bit high-speed interface up to 42 MHz
Integrated NAND* engine: NFC with 4 KB RAM buffer and ECC
Integrated M-PHY* interface
Integrated SPI engine: up to 21 MHz clock for popular SPI memory flash IC
Integrated self-test core that excludes 90% faults in production
Integrated CCID card reader for Z3X Software Use

Z3X Easy-Jtag Plus – Hardware benefits:
Box to Host PC speed increased up to 40 MB/sec
JTAG Interface speed increased by 20%
Compatible with old Easy JTAG 1st generation ISP adapters (1 bit)
Compatible with most of the popular eMMC sockets (with supplied adapters)
Full support for Windows XP
Z3X Easy-Jtag Plus Lite Set – Package Content:
Easy-JTAG Plus Box Hardware
Z3X preactivated card with EasyJTAG PLUS Activation
USB A-B cable
Adapter set (JTAG, ISP 1BIT, ISP 4BIT, U-SOCKET, E-SOCKET)
1 year guaranteed free support access

* The supplier retains the right to change some positions in the list of cables and accessories coming together with the product.

Posted on

Z3X Easy-Jtag+ Lite Upgrade Set for Easy-Jtag Owners. Specially for Boxes activated after 2017.07

Z3X Easy-Jtag Plus Lite Upgrade Set is designated for those users, who already own Z3X Easy-Jtag, but want to increase its possibilities and enjoy new features.
Z3X Easy-Jtag Plus is an innovative all in one service tool for phone and phone boot repair, data recovery, SPI memory programming and many other features. Supports eMMC, ISP, JTAG, SPI, NAND and much more protocols.
This Special Offer is valid for the boxes activated only after 07.07.2017.

Z3X Easy-Jtag Plus – Hardware features:
Updated Host MCU SAM3X8E
Updated high-speed FPGA SPARTAN6
Updated power management subsystem – full digital PWM with ADC control
Added VCC and VCCQ switch with overcurrent protection
Updated USB device interface: USB 2.0 480 Mbps (high speed)
Integrated ISP engine: Z3X high power pro engine (4 MB/s)
Added eMMC 8-bit high-speed interface up to 42 MHz
Integrated SPI engine: up to 21 MHz clock for popular SPI memory flash IC
Integrated self-test core that excludes 90% faults in production

Z3X Easy-Jtag Plus – Hardware benefits:
Box to Host PC speed increased up to 40 MB/sec
eMMC 1 Bit ISP Speed increased up to 4 MB/sec
eMMC 4 Bit ISP Speed increased up to 12 MB/sec (eMMC 5.0+) **
eMMC 4 Bit Speed up to 18 MB/sec
eMMC 8 Bit Speed up to 28 MB/sec (eMMC 5.0+)
Plug and Play for Windows OS 8/ 8.1/10

Z3X Easy-Jtag Plus Lite Upgrade Set – Package Content:
Easy-JTAG Plus Box Hardware
Free activation for new users (boxes that have been in use for less than 6 months) *
USB A-B cable
Adapter set – 5 pcs. (JTAG, ISP 1BIT, ISP 4BIT, U-SOCKET, E-SOCKET)
1 year guaranteed free support access
*A smart card is not included. Need to use the card from an old box.
* The supplier retains the right to change some positions in the list of cables and accessories coming together with the product.

Posted on

iPhone X Case,iPhone 10 Case,iBarbe Slim Fit TPU rubber Bumper Hybrid + Scratch Resistant Hard Back Panel thin silicone protective card Cover phone holder for Apple iPhone X / 10 Phone 2017-red/blue

The Dual Layers provide double Hybrid Protection Case for Your iPhone X 2017
The iPhone X case brings out the beauty of your phone while ensuring that your phone stays protected. A simple yet elegant design for those looking for a minimal look.
Featured Design
Made of a premium TPU material, hardback polycarbonate panel, and a scratch-resistant coating on the back cover for reinforced shock-absorption and protection.
Raised Protective edge
Raised edges keeps your phone screen and camera off flat surfaces and away from potential scratches or scrapes.
Easy Access Buttons for Convenient
This case is designed with semi-hollow buttons which make press and touch easy and comfortable. The larger charge port is specially made for the Apple Lighting cable and most third party cables. You need not take off the case when iPhone is being charged.
Note: Compatible with most of iPhone X screen protector.
Package include: 1Pack PC + rubber dual Layers Hybrid case

Posted on

SURE Smart-Card Reader 2 – extract all the information from Schlumberger, JCOP, IDCore 10 & TOP card

With SURE Smart-Card Reader 2 you can extract all the information you need from pretty much any type of card: Schlumberger, JCOP, IDCore 10, TOP.

SURE Smart-Card Reader 2 – Compatible Cards:
Schlumberger
JCOP
IDCore 10
TOP

SURE Smart-Card Reader 2 – Compatible Boxes/Dongles:
Octopus Box
Pegasus Box
Medusa PRO Box
Z3X Box
SPT Box
Polar Box 3
Octoplus Dongle LG Lite
Octoplus Dongle Samsung Lite
Octoplus Dongle Samsung + LG Lite
AsanSam Dongle
Avengers Dongle
BEST Dongle
Falcon Dongle
GB-Key
GcPro Key
HUA Dongle
Infinity-CDMA Tool Dongle
Infinity-Box Dongle
Micro-Dongle
Miracle Key Dongle
MKey Dongle
NCK Dongle
UMT Dongle

Posted on

Falcon Dongle – mobile phones repair software tool for HTC/BlackBerry/Huawei/Samsung/Qualcomm/ZTE/LG

Falcon Dongle is a new generation mobile phones repair software tool for HTC/BlackBerry/Huawei/Samsung/Qualcomm/ZTE/LG and other well-known brands.

MTK
ADB Mode:
Read Info / Codes
Direct Unlock
IMEI Repair
Repair Wi-Fi
Remove All Locks
Backup FW
NV-Ram Read/Write

Meta Mode:
Read Info/Codes
Direct Unlock

Wi-Fi Mode:
Unlock phone via Wi-Fi
Read Codes
Direct Unlock

Samsung:
Read Info/Codes
Direct Unlock
Relock
Repair IMEI/Serial/BT/Product Code/HW Ver.
Read/Write Cert
Reset MSL/Screen Locks
Read/Write/Reset EFS
Factory Reset
Enable/Disable DIAG
Reset FRP/Reactivation/EE
Samsung Flasher

Qualcomm:
Read Info/Codes
Direct Unlock
Enable DIAG
Repair IMEI
Backup/Restore/Reset Security

Huawei:
Read Info
Direct Unlock
Enable DIAG
Relock
Read/Write Security
Repair Security/Invalid SIM Locks
CID Unlock

ZTE:
Read Info
Direct Unlock
Repair IMEI/Wi-Fi/Bluetooth

HTC:
Read Info/Codes
Direct Unlock
Factory Reset
Reset FRP

BlackBerry:
Read Info
Read MEP
MEP 0 Unlock
Wipe Factory Reset
IMEI/ESN/MEID Repair
Flasher

LG:
Factory Reset
IMEI Repair
Read/Write/Reset Security
Reset Screen Locks
Remove FRP

Posted on

NCK Box with cables

NCK Box is the next evolutionary step in direct unlock support By NCK Dongle Team. With NCK Box you can take full advantage of all the Direct Unlock features. NCK Box – Package Content: NCK Box is a polyfunctional phone servicing tool for Alcatel, Samsung, LG, Huawei and other devices’ flashing, software repair and unlocking. NCK Box – Package Content: NCK Box with smart card inside Cables (15pcs): Alcatel S210 RJ45 cable LG GS102 RJ45 cable LG KG800 RJ45 cable LG KE500 RJ45 cable Micro USB CA101 RJ45 cable Micro USB cable Motorola WX-series RJ45 cable Nokia Easy Flash 3-in-1 USB and RJ45 cable Samsung C180 RJ45 cable Samsung E210 RJ45 + USB combo cable Samsung Micro UART (C3300k) RJ45 cable Samsung Micro UART (S7070) RJ45 cable Testpoint cable with labeled wires Sony Ericsson test point cable ZTE X760 RJ45 cable. Package content (cable set) may be changed by manufacturer without notification

Posted on

NCK Dongle Activated for LG+Alcatel+HUAWEI Repair Flash

November 11, 2015, Posted Samsung (AlL New Models) FRP (Factory Reset Protection) – More Models Added and Some Bugs Fixed, like for J700H etc… Added Flashing Option also For the Following Phones: SM-G710SM-G7106SM-G7105HSM-G530HSM-531HSM-G530BTSM-G7105HSM-G530BTSM-G730ASM-G730W8SM-G7508QSM-G800HQSM-G850ASM-G7508QSM-G860PSM-G870ASM-G870WSM-G9006VSM-G9008VSM-G900AZSM-G900FDSM-G900FQSM-A300FSM-A300FUSM-A500FSM-A500F1SM-A500FQSM-A500FUSM-A500HSM-A500HQSM-A500KSM-A500LSM-A500MSM-A500XSM-A500SSM-A500XZSM-A500YSM-A500XYSM-A3SM-A5SM-A8SM-J3SM-J5SM-J7SM-J500FSM-J500FNSM-J700FSM-J700HSM-J700M Android Factory Reset Protection (FRP) is a new feature to protect your device which has been added to several Samsung devices that are ru… Read More November 8, 2015, Posted Added: Samsung – All New Models FRP (Factory Reset Protection) Lock Remove – One Click – Safe – No Root – No ADB – No special Cable – etc.. Samsung SPD SM-G110B – Direct Unlock Including Hard Locked Phones.SM-G110H – Direct Unlock Including Hard Locked Phones.SM-G110M – Direct Unlock Including Hard Locked Phones.SM-G130E – Direct Unlock Including Hard Locked Phones.SM-G130H – Direct Unlock Including Hard Locked Phones.SM-G130HN – Direct Unlock Including Hard Locked Phones.SM-G130M – Direct Unlock Including Hard Locked Phones.SM-G318H – Direct Unlock Including Hard Locked Phones.SM-G355H – Direct Unlock Including Hard Locked Phones.SM-G355HN – Direct Unlock Including Hard Locked Phones.SM-G355M – Direct Unlock Including Hard Locked Phones.

Posted on

NCK Box – unlock and flash Alcatel, Samsung, LG, Huawei and other mobile devices

NCK Box is a multifunctional phone servicing tool for Alcatel, Samsung, LG, Huawei and other devices’ firmware writing, software repair and decoding.

NCK Box – Features

Direct Decode
Alcatel
Huawei
HTC
LG
XPERIA
Samsung
ZTE and other brands
Huawei with old and new security types

Read Codes:
Alcatel
BlackBerry
Huawei
HTC
Samsung
Motorola
ZTE
Alcatel, Motorola WX-series

Decode Code Calculation by IMEI:
Alcatel – MTK – Android – Modems
Avvio
BlackBerry
Chibo
Doro
GTran
Huawei
MicroMax
Mojo
Motorola
Mivistar
Orange
Pantech
TCL
SFR
Spice
Vodafone
T-Mobile
TMN
ZTE – MTK – Android – Modems

Write Firmware/Backup
Read phone’s firmware version
COM port speed – up to 921600 bps
Read and restore backup
Upgrade firmware
Upgrade and downgrade firmware version

IMEI
Repair IMEI, including models with more than one SIM
Repair Software IMEI
Repair “Blank” IMEI

Repair Security Area
Repair Alcatel Security Area via flashing
Works with FFS through boot mode
Works with network calibrations
Phone book backup
Format file system

NCK Box – Supported CPUs
Qualcomm
Broadcom
Infineon
Swift
Sysol3
MediaTek

Posted on

NCK Box – decode, write firmware and service Alcatel, Samsung, LG, Huawei and other mobile devices

NCK Box is a multifunctional phone servicing tool for Alcatel, Samsung, LG, Huawei and other devices’ firmware writing, software repair and decoding.

NCK Box – Features

Direct Decode
Alcatel
Huawei
HTC
LG
XPERIA
Samsung
ZTE and other brands
Huawei with old and new security types

Read Codes:
Alcatel
BlackBerry
Huawei
HTC
Samsung
Motorola
ZTE
Alcatel, Motorola WX-series

Decode Code Calculation by IMEI:
Alcatel – MTK – Android – Modems
Avvio
BlackBerry
Chibo
Doro
GTran
Huawei
MicroMax
Mojo
Motorola
Mivistar
Orange
Pantech
TCL
SFR
Spice
Vodafone
T-Mobile
TMN
ZTE – MTK – Android – Modems

Write Firmware/Backup
Read phone’s firmware version
COM port speed – up to 921600 bps
Read and restore backup
Upgrade firmware
Upgrade and downgrade firmware version

IMEI
Repair IMEI, including models with more than one SIM
Repair Software IMEI
Repair “Blank” IMEI

Repair Security Area
Repair Alcatel Security Area via flashing
Works with FFS through boot mode
Works with network calibrations
Phone book backup
Format file system

NCK Box – Supported CPUs
Qualcomm
Broadcom
Infineon
Swift
Sysol3
MediaTek

Posted on

NCK Dongle – unlimited phone flashing, mobile unlocking and code calculation tool

NCK Dongle Fully Activated – Unlimited phone flashing, mobile unlocking and code calculation (standalone, no server required) tool for Alcatel, BlackBerry, Doro, HTC, Huawei, LG, Motorola, Pantech, Samsung, Sony Ericsson, Avvio, Chibo, Russian Phones, SFR, ZTE , Palm etc .
NCK Dongle Outstanding Features:
Unlimited Unlock operations
Direct Unlock for SPD & MTK & Some Qualcomm
Read Codes for SPD & MTK & Some Qualcomm
Phone Book Backup & Restore
Read BlackBerry Unlock Codes
0 MEP Blackberry Unlock
Calculate BlackBerry 5 Level Codes via MEP and PRD
Read Codes for HTC (Omap & Qualcomm)
Read/Write MTK Flash
Write MTK Factory Flash (flash files can be found in support area only)
Format MTK phones
Reset FRP for Qualcomm/SPD/MTK etc.
Unlock Bootloader
Reset factory defaults (ZTE phones with counter)
Read info and provider ID
Display Codes on PC
Supports latest PIDs
Reads LG Correct Code for Connected phone with RJ45 Cable + FTDI and USB
Unlock Code Calculations for Alcatel cell phones, Calculates 5 levels of Unlock Codes + All Existing PIDs Supported
Unlock Code Calculations for ZTE, Motorola WX-series, Vodafone, SFR, ZTE Android B03/B04 cell phones
Read Unlock Codes for LG Infineon cell phones
Factory Reset for LG Infineon based cell phones
Windows 7, Vista & XP compatible
USB Dongle protected
Standalone features
Multiflashing, language changing
Direct Unlock
Read Unlock Codes
Standalone calculator
File manager
User Code and Factory Reset
Windows 7, Vista & XP compatible

Posted on

NCK Dongle Pro (NCK Dongle Full + UMT) – unlimited phone flashing, unlocking/code calculation tool

NCK Dongle Pro (NCK Dongle Full + UMT) – unlimited phone flashing, mobile unlocking/code calculation standalone tool for Alcatel, BlackBerry, Doro, HTC, Huawei, LG, Motorola, Pantech, Samsung, Sony Ericsson, SFR, ZTE, Palm cell phones.
NCK Dongle Pro – Features
Unlimited Unlock operations
Read BlackBerry Unlock Codes
Calculate BlackBerry 5 Level Codes via MEP
Calculate BlackBerry 5 Level Codes via PRD
Read Codes for HTC (OMAP & Qualcomm)
Read/Write MTK Flash
Write MTK Factory Flash (Flash files can be found in support area only)
Format MTK phones
Reset factory defaults (ZTE phones with counter)
Read info and provider ID
Display Codes on PC
Supports latest PIDs
Reads LG Correct Code for Connected phone with RJ45 Cable + FTDI and USB
Unlock Code Calculations for Alcatel cell phones, Calculates 5 levels of Unlock Codes + All Existing PIDs Supported
Unlock Code Calculations for ZTE cell phones
Unlock Code Calculations for Motorola WX-series cell phones
Unlock Code Calculations for Vodafone cell phones
Unlock Code Calculations for SFR cell phones
Unlock Code Calculations for ZTE Android B03/B04 cell phones
Read Unlock Codes for LG Infineon cell phones
Factory Reset for LG Infineon based cell phones
USB Dongle protected
Standalone features
Multi Flashing, language changing
Direct Unlock
Read Unlock Codes
File manager
User Code and Factory Reset
Remove Sim Lock
Repair BT
Wipe Phones
Remove Google account
Windows XP, Windows Vista, Windows 7, Windows 8.0, Windows 8.1, Windows 10 compatible

Posted on

MOORC JPIN JTAG Molex Flex Cable 35-in-1 with JTAG-ISP 5-in-1 Adapter for Samsung, LG, Huawei, Asus.

35-in-1 JTAG Molex adapter set by MOORC allows user to perform a wide range of servicing procedures with supported Samsung, LG, Huawei, Asus, Google mobile devices and phone servicing tools via JTAG without soldering and pinouts. MOORC JTAG-ISP ADAPTER 5-in-1 can be used with existing JTAG EMMC tools including ATF, Riff, Medusa etc. Supports all JTAG EMMC boxes: BGA-221 BGA-169-153 BGA-162-186 Programming and JPIN outputs Package Contents: Main JTAG ISP Adapter – 1 pc. RJ45 Connection Cable – 1 pc. BGA-221 Adapter – 1 pc. BGA-169-153 Adapter – 1 pc. BGA-162-186 Adapter – 1 pc. 35-in-1 JTAG Molex adapter set – Compatible JTAG Tools: RIFF Box v.2 Z3X Easy JTAG Omnia Repair Tool (ORT) GPG eMMC Box Medusa PRO Box and other devices that use supported JTAG interface

Posted on

Medusa Pro 20 Pin adapter for JTAG and MMC interfaces

Medusa Pro 20 Pin adapter is intended to be used with Medusa Pro Box. Its pins are marked in accordance with Medusa Pro Box pinout.

This adapter has marked pinouts for JTAG and MMC interfaces, so you can easily find a required pin without checking the software. The adapter has external pads, so you can solder a wire of a required thickness. You can buy this adapter if you need few adapters with different pinouts or you just want to replace the one that has been included in Medusa Pro Box package.

Pinout:

JTAG top side

Pin1 VREF
Pin3 TRST
Pin5 TDI
Pin7 TMS
Pin9 TCK
Pin11 RTCK
Pin13 TD0
Pin15 Reset
Pin17 NC
Pin19 NC
eMMC bottom side:
Pin2 GND
Pin4 EMMc D0
Pin6 EMMc D1
Pin8 EMMc D2
Pin10 EMMc D3
Pin12 EMMC CLK
Pin14 EMMC CMD
Pin16 GND
Pin18 2.8V

Posted on

Medusa PRO Box

Medusa PRO Box is a professional phone flashing and mobile repairing tool that lets you work with a wide range of Samsung, Huawei, LG, Motorola, Siemens, Sony Ericsson, Vodafone, ZTE and other mobile devices through JTAG, USB and MMC interfaces. The main intended purpose of Medusa PRO Box is repairing dead boots of the devices (mobile phones, PDAs, modems, etc.) or these devices recovery, until they become fully operational. Medusa PRO Box Software is a windows application for Medusa PRO Box, provides convenient interface for end user.

Medusa PRO Box – Package Contains:

Medusa Pro (box with a smart card) – 1 pc.
Micro UART cable (with 530K resistor) for Samsung C3303K – 1 pc.
Optimus cable – 1 pc.
Medusa Pro JIG Adapter – 1 pc.
Copper wire 0.1 mm – 1 pc.
USB A-B cable – 1 pc.
6 months of warranty
Free access to repair file download area at Boot-Loader v2.0
Free Medusa Pro Support Area