Category: frimware

X100 PAD2 Functions and  Features:
  Key Programming, especially added with VW 4th & 5th IMMO
PIN Code Reading
OBDII diagnosis: 4 systems diagnosis, Read & Clear codes for Engine, Brakes, Central Electrics, Airbag System
Oil Reset/Engine oil light reset
Tire Pressure Warning Light Reset
Timing belt light reset (Manual Operation)
EPB Electrical Parking Brake Adaptation
TPS Throttle Body Adaptation
Steering Angle Calibration
Battery Reset
DPF
Hexadcimal editor(Win Hex)
Support the latest vehicles with CAN BUS and UDS protocol
Update Via WIFI at xtooltech.com (always equipe your device with the latest software)

Key Programming Features:
1.New keys programming
2. PIN Code reading with EEPROM
3.Hexadcimal editor(Win Hex)
2.Reads keys from immobilizer’s memory
3.New immobilizer programming
4.Vehicle Identification Number programming
5.Reset ECM & reset immobilizer
6.New remote controller programming
7.With full and strong database for the most important vehicle makes

Package including:
1pc x OBD II-16
1pc x for HONDA-3
1pc x for MAZDA-17R
1pc x for KIA-20
1pc x for HYUNDAI/KIA-10
1pc x DB15_Male To VGA_Male
1pc x USB_TYPE-C
1pc x X-100 PAD2
1pc x KC100
1pc x EEPROM adapter
1pc x USB_TYPE-C and Mini_USB
1pc x Charger for Tablet
1pc x US Power Adapter
1pc x EU Power Adapter
1pc x Certificate of Quality
1pc x Packing List

The CC Debugger is a small programmer and debugger for the TI Low Power RF System-on-Chips. It can be used together with IAR Embedded Workbench for 8051 (version 7.51A or later) for debugging and SmartRF Flash Programmer for flash programming. The CC Debugger can also be used for controlling selected devices from SmartRF Studio.

We are the original manufacturer and provide Customize Service.
Professional manufacturer in all kinds of IC chip testing sockets and adapters.
We have HIGH QUALITY products with the most competitive price! Welcome to contact us.

Any other questions regarding to products, do not hesitate to contact us. Technical support and datasheet are available if you needed.

Features:
Retrieve data(Contacts,Photos, SMS, Video, Music) from Android phones which are physical damage, such as Cracked, Shattered, Smashed, Broken, Busted Screens ect
With SD/USB interface, an easy use tool to connect chip and PC.
Support flat bottom and solder ball testing
Frame/Size limiter: 11.5x13mm is the default limiter; Opional Size: 9x11mm, 11x10mm, 12x16mm, 12x18mm, 14x18mm(Please check your IC, if you need specific size for the frame/limiter, please contact us or leave a message.

) Specifics:
Model Number: eMCP/eMCP test socket to SD
Applicable IC Dimensions: 9x11mm, 11x10mm, 11.5x13mm, 12x16mm, 12x18mm, 14x18mm
Frequency: Low Frequency
Operation Life: 100,000(Mechanical)
Operating Temperature: -55 ~ +170 Celsius degree

Package contained:
1*BGA529 SD Socket
1* 15x15mm Default Size Limiter/Framer

1.8V SPI Flash adapter for Iphone or motherboard 1.8V SPI Flash Memory SOP8 DIP8 W25 MX25… This adapter can use on some universal programmers, such as TL866, Skypro, Stager and so on. For example, TL866 programmable VCC is from 3.3V to 6.5V. If the chip is 1.8V, you need to use this adapter to program. It can support 1.8V SPI Flash Memory chips of SOP8 (150mil or 200mil body width) DIP8 package, such as Winbond W25Q64, MXIC MX25U1635, MX25U6435 and so on. These chips are often used on Iphone and computer motherboard. The main 1.8V chip like: winbond W25Q10EW,W25Q20EW,W25Q20BW,W25Q40EW,W25Q40BW,W25Q80EW,W25Q80BW,W25Q16DW,W25Q16FW,W25Q32DW,W25Q32FW,W25Q64DW,W25Q64FW,W25F128FW MXIC MX25U5121E,MX25R512F,MX25U1001E,MX25R1035F,MX25U2033E,MX25R2035F,MX25U4035, MX25U4033E,MX25U4032E,MX25R4035F,MX25U8035,MX25U8035E,MX25U8033E,MX25U8032E, MX25R8035F,MX25U1635E,MX25V1635F,MX25U1635F,MX25R1635F,MX25U3235E,MX25U3235F, MX25R3235F,MX25U6473F,MX25U6435F,MX25R6435F,MX25U12873F,MX25U12835F, MX25U25635F,MX25U51245G,MX25UM51245G,MX66U51235F ect………..

Feature:
100% brand new and high quality
This item for sop8 chip ,such as 25c, 24c , 93c and so on .
It can be used for the online in-circuit sop8 -dip8 adapter ,it is used for a sop8 chip programming that has been soldered on circuit board , it can online programming the sop8 chip , do not need take the chip of the circuit board , so it can save people’s time

Specification:
TEST CLIP, SOIC 8/ SOP8
Connector type: Test Clip
Pin format: SOIC / SOP
Use for 24 25 93 chip in-circuit programming

Package include:
1x clip
1x cable
1x adapter board

We are the original manufacturer and provide Customize Service.
Professional manufacturer in all kinds of IC chip testing sockets and adapters.
We have HIGH QUALITY products with the most competitive price! Welcome to contact us.

Any other questions regarding to products, do not hesitate to contact us. Technical support and datasheet are available if you needed.

Features:
Retrieve data(Contacts,Photos, SMS, Video, Music) from Android phones which are physical damage, such as Cracked, Shattered, Smashed, Broken, Busted Screens ect
With SD/USB interface, an easy use tool to connect chip and PC.
Support flat bottom and solder ball testing
Frame/Size limiter: 11.5x13mm is the default limiter; Opional Size: 9x11mm, 11x10mm, 12x16mm, 12x18mm, 14x18mm(Please check your IC, if you need specific size for the frame/limiter, please contact us or leave a message.

) Specifics:
Model Number: eMCP/eMCP test socket to SD
Applicable IC Dimensions: 9x11mm, 11x10mm, 11.5x13mm, 12x16mm, 12x18mm, 14x18mm
Frequency: Low Frequency
Operation Life: 100,000(Mechanical)
Operating Temperature: -55 ~ +170 Celsius degree

Package contained:
1*BGA529 SD Socket
1* 15x15mm Default Size Limiter/Framer

Bundle includes MicroView Arduino Module and USB Programmer.

The MicroView is the first chip-sized Arduino compatible module that lets you see what your Arduino is thinking using a built-in OLED display. With the on-board 64×48 pixel OLED, you can use the MicroView to display sensor data, emails, pin status, and more. It also fits nicely into a breadboard to make prototyping easy. The MicroView also has a full-featured Arduino library to make programming the module easy.

In the heart of MicroView there is ATMEL’s ATmega328P, 5V & 3.3V LDO and a 64×48 pixel OLED display, together with other passive components that allow the MicroView to operate without any external components other than a power supply. Additionally, the MicroView is 100% code compatible with Arduino Uno (ATmega328P version), meaning the code that runs on an Arduino Uno will also be able to run on the MicroView if the IO pins used in the code are externally exposed on the MicroView.

This USB programmer connects directly to the MicroView and lets you not only program the module, but use it to interface with your computer, Rapsberry Pi, or other USB device. The programmer has both male and female headers which allow it to be plugged into a MicroView module and a breadboard at the same time, making prototyping quick and easy.

*Support 24EEROM.
*Support 25 SPI FLASH.
*Automatic identification chip model 25 series.
*Support USB to TTL.
*A multi-purpose machine, online Brush.
*STC microcontroller supports a full range of program download.
*For a variety of software for backup, erase, programming, calibration and other movements.
*Provide 5V-3.3V power supply output.
*Package include:1 x CH341A programmer .

Feedback:
We greatly appreciate your POSITIVE feedback. Please do NOT leave negative feedback without asking for help. Our aim is to provide Top Level Customer Service, so we will try our best to solve any problem.Thank you very much!

We are the original manufacturer and provide Customize Service.
Professional manufacturer in all kinds of IC chip testing sockets and adapters.
We have HIGH QUALITY products with the most competitive price! Welcome to contact us.

Any other questions regarding to products, do not hesitate to contact us. Technical support and datasheet are available if you needed.

Features:
Retrieve data(Contacts,Photos, SMS, Video, Music) from Android phones which are physical damage, such as Cracked, Shattered, Smashed, Broken, Busted Screens ect
With SD/USB interface, an easy use tool to connect chip and PC.
Support flat bottom and solder ball testing
Frame/Size limiter: 11.5x13mm is the default limiter; Opional Size: 9x11mm, 11x10mm, 12x16mm, 12x18mm, 14x18mm(Please check your IC, if you need specific size for the frame/limiter, please contact us or leave a message.

) Specifics:
Model Number: eMCP/eMCP test socket to SD
Applicable IC Dimensions: 9x11mm, 11x10mm, 11.5x13mm, 12x16mm, 12x18mm, 14x18mm, 15x15mm(Specially for BGA529)
Frequency: Low Frequency
Operation Life: 100,000(Mechanical)
Operating Temperature: -55 ~ +170 Celsius degree

Package contained:
1*BGA169/153-SD Socket
1*BGA162/186-SD Socket
1*BGA221-SD Socket
1*BGA529-SD Socket
1 set of Size limiter(6 size of limiter/Framer, 11.5x13mm is the Default Size within socket
1* SD Card Reader

This FWH/LPC+ adapter is backward compatible with Willem programmer’s FWH/HUB adapter. It supports both True USB as well as parallal willem programmer.

It’s able to accept TSOP32 and TSOP40 ZIF socket for supporting TSOP32 and TSOP40 FWH/LPC flash chips.

This adapter is for True USB/Standard/Enhanced Willem EPROM programmer.

Device supported:
INTEL:i82802AB, i82802AC
ATMEL:AT49LW040, SST:SST49LF002/A, SST49LF003/A,SST49LF004/A,SST49LF008/A;W39V040F,W39V040FA,W39V040FAP,W39V080F,W39V080FA,W39V080FAP
LPC Flash:SST:SST49LF020/A,SST49LF030/A,SST49LF040/A;W39V040A,W39V040AP,SST49LF080/A;W39V080A,W39V080AP,W49V002A,W49V002APSST 49LF002B, 49LF004B
FWH/LPC:PMC:PMC49FL002,PMC49FL004ST micro:M50FW040,M50FW002,M50LPW002,M50LPW040,M50FLW040A,M50FLW080B,M50LPW080,M50FLW080A,M50FLW080B

With TSOP40 ZIF socket:
INTEL:i82802AC;ATMEL:AT49LW080/008;SST:SST49LF008/A;
LPC flash:SST:SST49LF080/A;
FWH/LPC:ST micro:M50FW080/008,M50LPW080/008,M50FW016,M50LPW116;PT49V080/008.

Feature:
100% brand new and high quality This item for sop8 chip ,such as 25c, 24c , 93c and so on .

It can be used for the online in-circuit sop8 -dip8 adapter ,it is used for a sop8 chip programming that has been soldered on circuit board , it can online programming the sop8 chip , do not need take the chip of the circuit board , so it can save people’s time

Specification: TEST CLIP, SOIC 8/ SOP8
Connector type: Test Clip
Pin format: SOIC / SOP
Use for 24 25 93 chip in-circuit programming

Package include:

1x clip
1x cable
1x adapter board

Description
Microchip’s PICkit3 In-Circuit Debugger/Programmer uses in-circuit debugging logic incorporated into each chip with Flash memory to provide a low-cost hardware debugger and programmer.
The MPLAB PICkit3 allows debugging and programming of PIC® and dsPIC® Flash microcontrollers at a most affordable price point using the powerful graphical user interface of the MPLAB Integrated Development Environment (IDE). The MPLAB PICkit3 is connected to the design engineer’s PC using a full speed USB interface and can be connected to the target via an Microchip debug (RJ-11) connector (compatible with MPLAB ICD 2, MPLAB ICD 3 and MPLAB REAL ICE). The connector uses two device I/O pins and the reset line to implement in-circuit debugging and In-Circuit Serial ProgrammingTM.

Features
Full-speed USB support using Windows standard drivers
Real-time execution
Processors run at maximum speeds
MPLAB IDE compatible (free copy included)
Built-in over-voltage/short circuit monitor
Firmware upgradeable from PC/web download
Totally enclosed
Supports low voltage to 5 volts (1.8v to 5.0v range)
Diagnostic LEDs (power, active, status)
Read/write program and data memory of microcontroller
Erase of all memory types (EEPROM, ID, configuration and program) with verification
Freeze-peripherals at breakpoint
Program up to 512K byte flash with the Programmer-to-Go

Package Contains
PICkit3 × 1
USB type A to Mini-B cable × 1
6-pin RJ11 cable × 1
RJ-11 to ICSP adaptor × 1
6-pin ICSP cable × 1

The ATtiny85 is a high-performance, low-power 8-bit microcontroller based on Atmel’s AVR RISC technology. It includes six I/O lines, 32 general purpose registers, 512 bytes of RAM, and an 8-bit high-speed timer; among other software-accessible power saving, debugging, and general purpose features.

Specifications
ADC channels: 4
ADC gain stage: yes
ADC resolution: 10 bits
ADC speed: 15 ksps
Analog comparators: 1
Calibrated RC oscillator: yes
CAN: no
CPU: 8-bit AVR
Crypto engine: no
DAC resolution: 0 bits
Debug interface: debugWIRE
Differential ADC inputs: 2
DRAM memory: no
EEPROM: 512 bytes
Ethernet: no
External bus interface: no
External interrupts: 6
FPU: no
I2S: no
Input capture channels: 0
LIN: no
Max I/O pins: 6
Max operating frequency: 20 MHz
Memory: 8 kB (flash)
MMU: no
MPU: no
NAND interface: no
Operating voltage: 1.8V – 5.5V
Output compare channels: 5
Pin count: 8
PWM channels: 6
Self-program memory: yes
SPI: 1
SRAM: 0.5 kB
Temperature range: -40°C – 85°C
Temperature sensor: yes
Timers: 2
Touch channels: 3
TWI: 1 (I2C)
UART: no
USB interface: no
USB speed: N/A
Watchdog: yes

1.8V SPI Flash adapter for Iphone or motherboard 1.8V SPI Flash Memory SOP8 DIP8 W25 MX25…
This adapter can use on some universal programmers, such as TL866, Skypro, Stager and so on.
For example, TL866 programmable VCC is from 3.3V to 6.5V. If the chip is 1.8V, you need to use this adapter to program.
It can support 1.8V SPI Flash Memory chips of SOP8 (150mil or 200mil body width) DIP8 package, such as Winbond W25Q64, MXIC MX25U1635, MX25U6435 and so on. These chips are often used on Iphone and computer motherboard.
Please note: this adapter cannot use on TNM2000 programmer。
Size:40*38*22mm/1.58*1.49*0.87in(L*W*H).
Weight:15g/0.51oz.
The main 1.8V chip like:
Winbond：
W25Q10EW,W25Q20EW,W25Q20BW,W25Q40EW,W25Q40BW,W25Q80EW,W25Q80BW,W25Q16DW,W25Q16FW,W25Q32DW,W25Q32FW,W25Q64DW,W25Q64FW,W25F128FW
MX IC：
MX25U5121E,MX25R512F,MX25U1001E,MX25R1035F,MX25U2033E,MX25R2035F,MX25U4035,MX25U4033E,MX25U4032E,MX25R4035F,MX25U8035,MX25U8035E,MX25U8033E,MX25U8032E,MX25R8035F,MX25U1635E,MX25V1635F,MX25U1635F,MX25R1635F,MX25U3235E,MX25U3235F,MX25R3235F,MX25U6473F,MX25U6435F,MX25R6435F,MX25U12873F,MX25U12835F,MX25U25635F,MX25U51245G,MX25UM51245G,MX66U51235F ect…
Packge include:
1 x 1.8V adapter

Parameters:

CPU:Amlogic S905 Quad-Core 64-bit RAM Cortex-A53@2GHz

GPU:Quad-Core Mali-450

8G ROM Samsung eMMC

SDRAM:1 GB DDR3

Power supply:DC 5V/2A

OS:Android 5.1

3D:Hardware 3D graphics acceleration

USB host:4 high speed USB 2.0,support U DISK and USB HDD.

Card reader:SD/SDHC/MMC cards

HDD file system:FAT16/FAT32/NTFS.

Support subtitle:SRT/SMI/SUB/SSA/IDX+USB.

High definition video output:SD/HD max.1920×1080 pixel.

OSD type of languages:English/French/German/Spanish/Italian etc.

LAN:Ethernet 10/100M,standard RJ-45.

Wireless:built-in Wifi.

Mouse/Keyboard:Support mouse and keyboard via USB,Support 2.4GHz wireless mouse and
keyboard via 2.4GHz USB dongle.

HDMI:HDMI 2.0b with CEC.

AV:Sopport.

SPDF/IEC958:Coaxial

Package List:
1 x Android TV Box
1 x Remote
1 x AC charger adapter
1 x HDMI cable
1 x User manual (English)

WINGONEER® trademark Reg.NO:4747611

Description:
This programmer is well-designed with high-density SMD technology. An unified user interface, easy to use.
Fully functional, reliable program running of application software, ultra-small code, runs faster.

Features:
*High Speed Programming：Built-in MCU with high-performance and high-capacity USB interface, at the communication speed of 12Mbps, being in line with (For each chip) well-designed programming algorithm and USB high-speed communications.
*Unique ultra-low power: Equipped with the ultra-low power chips and power supplied via USB interface. Hardly feel the heat of the programmer after such long continuous work.
*Portable performance: Lightweight and exquisite, and no need to carry with an external power supply because of its ultra-low power that makes it more portable.
*Overvoltage, overcurrent protection: VCC, VPP power supply of the Programmer is furnished with the independent Grade 3 overcurrent protection and the protection of automatically cutting off power supply.
*Second development function of chip serial number: Has a variety of automatic numbering functions that are used commonly.
*Equipped with upgrading Function of the built-in hardware firmware program that can make sure your programmer’s firmware flash and application software can be timely updated.
*Programmer self-testing function: Can test itself on each pin of VPP, VCC, GND and I/O information, at the same time it can run an inside short-circuit test on VPP, VCC current.
*Superb 54/74F/LS/HC CMOS4000 series IC functional tests.
*AVR microcontroller one-to-one soft encryption
*Unified and convenient user interface.

Package:
1x WINGONEER® USB Programmer
1x WINGONEER® USB Cable
7x WINGONEER® Adapter
1x WINGONEER® IC extractor
1x WINGONEER® Installation CD

WINGONEER® trademark Reg.NO:4747611

Introduction:
Support 24 EEPROM and 25 SPI flash 8pin or 16pin chip
Carry CH341A chip, which can recognize 25 series chip
Support downloading STC series procedure of single chip
Indicate 24/ 25 status with lamp
Support expanding the utility by SPI pin

Package Included:
1x WINGONEER® CH341A Flash USB Programmer

Programmer supports chip list:
AMIC:
A25L05P, A25L10P, A25L20P, A25L40P, A25L80P, A25L16P
ATMEL:
AT25DF041A, AT25DF321, AT25F004, AT25F512A, AT25F2048, AT25F4096, AT25F1024A, AT25FS010, AT25FS040, AT26DF081A, AT26DF161A, AT26DF321, AT26F004
EON:
EN25B05, EN25P05, EN25B10, EN25P10, EN25BF20, EN25P20, EN25F20, EN25B40, EN25P40, EN25F40, EN25B80, · EN25P80, EN25F80, EN25T80, EN25B16, EN25P16, EN25B32, EN25P32, EN25B64, EN25P64
Excel Semiconductor Inc.
ES25P10, ES25P20, ES25P40 ?? ES25P80, ES25P16, ES25P32
ST:
M25P05A, M25P10A, M25P20, M25P40, M25P80, M25P16, M25P32, M25P64, M25PE10, M25PE20, M25PE40, M25PE80, M25PE16, M25PE32, M45PE10, M45PE20, M45PE40, M45PE80, M45PE16, M45PE32
MXIC:
MX25L512, MX25L1005, MX25L2005, MX25L4005, MX25L8005, MX25L1605, MX25L3205, MX25L6405, MX25L6445, MX25L6405 (SOP16)
NexFlash:
NX25P80, NX25P16, NX25P32
Chingis Technology Corporation
Pm25LV512, Pm25LV010, Pm25LV020, Pm25LV040, Pm25LV080, Pm25LV016, Pm25LV032, Pm25LV064
Saifun Semiconductors SA25F005, SA25F010, SA25F020, SA25F040, SA25F080, SA25F160, SA25F320, WINBOND W25P10, W25X10, W25Q10, W25P20, W25X20, W25Q20, W25P40, W25X40, W25Q40, W25P80, W25X80, W25Q80, W25P16, W25X16, W25Q16, W25P32, W25X32, W25Q32, W25P64, W25X64, W25Q64